Print and wind without a tension bar
NOTE
In order to prevent winding issues when winding the media in the opposite direction of
the roll in the drawer, the media has to be taped with enough tapes over the full width
of the roll to straighten the curling edge.
9. Move the media guides towards the middle to align with the media.
10. On the operator panel tap on [Ready].
The printer continues printing while winding the job.
After you finish
When you want to stop winding you have to cut the media. For more information, see
media on page
128
Chapter 4 - Handle the media
Cut the media (manual) on page
153,
155.
Cut the