Canon Colorado M Series Operation Manual page 168

Print a job
4. Submit the job.
NOTE
• When you have problems submitting your job, check if the physical width in the RIP
• In ONYX check the box in front of [Specify Physical Width] when you want to set the
• In Caldera you can choose to let the printer or the RIP do the roll selection. Click on
168 Chapter 5 - Print a job
corresponds with the width of the media roll.
Take into account the margin used for [Automatic advance correction] (_AAC_NONE,
_AAC_NORMAL, _AAC_ENHANCED, _AAC_ROBUST). You can check the value that is
used for the [Automatic advance correction] setting in the RIP
Also take into account that in print mode FLXfinish
(0.59 inch) is used.
page size and physical width manually.
the wrench icon and under [Roll selection], select [Printer] or [RIP].
+
a margin with a width of 15 mm