Canon Colorado M Series Operation Manual page 327

6. Use both hands to turn the media roll backwards (1) and remove the media from the metal paper
guide. If present, do this for both media rolls.
7. Close the media drawer.
8. Put on the Colorado M-series approved gloves.
9. Open the top cover.
10. Carefully push the curing carriage to the left over the filters (1).
11. Carefully push the printhead carriage to the left in manual maintenance position (2).
IMPORTANT
Touch the printhead carriage on the covered area only, otherwise you can damage the
printheads.
12. Take the knife and cut the media in the cutting guide (3). It is also possible to use the knife of the
machine.
Remove media from the paper path
Chapter 9 - Troubleshooting and support 327