Canon Colorado M Series Operation Manual page 95

1. Push the handles on the left and right side of the loading station to open the media feed.
2. Use both hands to move the media forward and slide the media under the metal paper guide
until you see it coming out on top.
3. Close the media feed.
4. If necessary, you can manually cut the leading edge of the media when it has not been cut
straight. Take a knife and cut the media in the cutting guide.
NOTE
Always use a straight cut leading edge for media types that are more difficult to
transport (e.g. canvas).
12. Close the media drawer carefully. The operator panel displays the message that new media is
detected.
IMPORTANT
Do not open the media drawer when the indicator light is off, you can damage the
machine.
Load a media roll (position 1)
Chapter 4 - Handle the media 95