Print Without Winding - Canon Colorado M Series Operation Manual

Print without winding

Introduction
If media can be transported well and is not too flexible, you can print without winding.
Before you begin
• Check the media category of your media. Media categories that need a tension bar cannot be
printed without winding.
• Printing without winding is set in the media type configuration in the RIP software. For printing
without winding you must select [no tension bar] under [Winding tension]. For more
information, see
• The printer is ready to print.
Procedure
1. On the operator panel tap on the [Output] icon.
2. Tap on [Output configuration].
3. Make sure [Wind the output] is set to [No].
NOTE
Make sure you set the output configuration in time, as you cannot change the
configuration once the media has passed the clamp.
Change the media settings on page 76.
Chapter 4 - Handle the media
Print without winding
139