General troubleshooting
General troubleshooting
Stop the printer
Introduction
In case of problems or a dangerous situation you can stop the printer immediately.
IMPORTANT
Opening the top cover during operations, can result in uncured ink. Only perform this action
when absolutely necessary.
Procedure
1. Move to the media input side.
2. Open the top cover.
Power is cut to the engine, the printer immediately stops all operations.
After you finish
Opening the top cover can cause a paper crash and result in uncured ink. You can solve the
situation yourself. For more information, see
316
Chapter 9 - Troubleshooting and support
Remove media from the paper path on page
325.