Performing Sewing Shape Selection - JUKI AC-172N-1790AN Instruction Manual

2-3. Performing sewing shape selection

B
C
① Display the LBH data input screen.
Only in case of the LBH data input screen (blue), the selection of
the sewing shape can be performed.
② Call the sewing shape selection screen.
A
Press SEWING SHAPE button
selection screen is displayed.
③ Select the 1st bar-tacking section.
Select the shape you desire to sew from among 5 kinds of the
1st bar-tacking shape buttons (B). When it is selected, the total
sewing shape in which the selected 1st bar-tacking is used is
displayed.
④ Select the sewing shape.
Select SEWING SHAPE button (C) you desire to sew.
⑤ Finish the sewing shape selection.
Press ENTER button
the selected sewing shape is displayed in the LBH data input
screen (blue).
Note) The number of sewing shapes to be displayed changes accord-
D
ing to the level selected in the sewing shape selection level of
memory switch data (level 2)
Refer to "II-3-1. Changing procedure of memory switch data"
→
p.110.
− 74 −
(A) and the sewing shape
(D) to finish the shape selection and
.