Heatspreader Plate Assembly Dimension; Environmental Specification - Kontron COMh-caRP User Manual

which carrier board connectors are used (5mm and 10mm height are available)
which cooling solution is used. The height of the cooling solution is not specified in the COM-HPC
specification
Figure 7: Module and Carrier Height with 10mm and 5mm connector height

3.8.3 Heatspreader Plate Assembly Dimension

Please check our Customer Section
3.9 Environmental Specification
The COMh-caRP support commercial temperature grades with on option of extended temperature
grades (E1). The E1 is only available for customized versions only.
Environmental
Operating
Commercial Grade
Non-operating -30°C to +85°C (-22°F to 185°F)
Operating
Extended Grade (E1)
Non-operating -30°C to +85°C (-22°F to 185°F)
Relative Humidity
Shock
(according to IEC / EN 60068-2-27)
Vibration
(according to IEC / EN 60068-2-6)
Table 32: Environmental Specification
www.kontron.com
for Heatspreader 3D models and drawings.
Description
0°C to +60°C (32°F to 140°F)
-25°C to +75°C (-13°F to 167°F)
93 % @40°C, non-condensing
Non-operating shock test (half-sinusoidal, 11ms, 15g)
Non-operating vibration (sinusoidal, 10 Hz to 2000 Hz, +/- 0.15 mm, 2 g)
COMh-caRP User Guide
34/60