Delayed Sensor Mode - Newland EM1300 Integration Manual

General Programming General Programming
Reading Mode

Delayed Sensor Mode

After programming, the engine will start to sense the environment without trigger.
There will be a delay before a scan. After a scan, it will stop and keep sensing to wait
another illumination changing. In delayed sensor mode, a trigger also can start a scan.
The sensitivity level could be chosen.
In delayed sensor mode, the engine could set Reading a barcode time length and interval length.
Reading a barcode time length
【Pro CMD：99900150】
In delayed sensor mode, reading a barcode time takes 2s as a unit and the range is from 0 to
30ms, 0 is infinite time; Interval takes 200ms as unit and the range is from 0 to 7.5s.
nlscan.com
Delayed Sensor Mode
【Pro CMD：99900115】
Code Programming ON
Code Programming OFF
Interval Length
【Pro CMD：99900151】
Tools
Page 32