Newland EM1300 Integration Manual page 121

Symbols
MSI-Plessey
Check Digit
MSI-Plessey may include Check Digit (not compulsory) following its
barcode messages. If included, it may be the last one or two digits. It
verifies the barcode message.
"NO Check, Transmit All" means to read without check and trans-
»
mit all bytes including barcode message and Check Digit.
【Pro CMD：99913103】
Double Check Digits, MOD10/MOD10
【Pro CMD：99913105】
Do not transmit Check Digit
【Pro CMD：99913107】
When "Check, Do Not Transmit Check Digit" is enabled and barcode message length
minus one is less than Min Message Length, it will lead to error beep.
E.g.：Reading a 4-byte (include Check Digit) MSI-Plessey with the Min Message Length
being 4 bytes and "Check, Do Not Transmit Check Digit" enabled leads to error beep.
nlscan.com
No Check
Code Programming ON
Code Programming OFF
Single Check Digit，MOD10
【Pro CMD：99913104】
Double Check Digits, MOD10/MOD11
【Pro CMD：99913106】
Transmit Check Digit
【Pro CMD：99913110】
Tools
Page 112