User Prefix; Disable Or Enable User Prefix; Program User Prefix - Newland EM1300 Integration Manual

Data Format Data Format
User Prefix
Disable or Enable User Prefix
User Prefix is added before barcode message. For example, if the user
prefix is "AB" and the barcode message is "123", the Host receives
"AB123".
Disable User Prefix
【Pro CMD：99904020】
Program User Prefix
Enable "Program User Prefix". Then program user prefix byte(s). To end the prefix,
read "Save programming" The user prefix byte is programmed in its hex values.
See example below.
Program "CODE" as user prefix (The hex of "CODE" are 0x43/0x4F/0x44/0x45):
1.
2.
3.
4.
5.
6.
appear to the left of a barcode.
nlscan.com
【Pro CMD：99904021】

Program User Prefix

【Pro CMD：
Read "Code Programming ON"
Read "Program User Prefix"
Read "4,3,4,F,4,4,4,5" in order
Read "Save Programming"
Read "Code Programming OFF".
Read "Allow User Prefix" to enable above programming. "CODE" will
Enable User Prefix
99904022 】
Tools
Code Programming ON
Code Programming OFF
Page 47