Deutshe12; Load Factory Default; Disable/Enable Deutshe12; Deutshe12 Code Id - Newland EM1300 Integration Manual

Symbols

Deutshe12

Load Factory Default

Disable/Enable Deutshe12

Enable Deutshe12，Do Not Transmit Check Digit
【Pro CMD：99911602】
Enable Deutshe12， Transmit Check Digit
【Pro CMD：99911603】
When the engine can not read Deutshe12, please read "Enable Deutshe12" and try again.
If Deutsche 12 and ITF-12 are enabled at the same time, the engine may mis-decode or has
chaos in programming. So it is better to disable ITF-14 if not used.

Deutshe12 Code ID

Example of setting Deutshe12 Code ID to "p" (0x70)
1. Read Enable Code Programming barcode.
2. Read Deutshe12 Code ID Setting barcode.
3. Read Following Barcodes: "7", and "0"
4. Read Save barcode
5. Read Disable Code Programming barcode.
nlscan.com
Load Deutshe12 Factory Default Deutshe12 Factory Default Factory Default
【Pro CMD：99911600】
Code ID Setting
【Pro CMD：99911604】
Code Programming ON
Code Programming OFF
Disable Deutshe12
【Pro CMD：99911601】
Tools
Page 81