Page 2
Newland Auto-ID Tech Inc.(“Newland Auto-ID”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Newland Auto-ID to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Newland Auto-ID.
Page 3
Quick Start Introduction EM3000 is an embedded barcode reading engine. Its gray scale CMOS image capturer and the Newland patented , a Computerized Image Recognition System, ensure the fast scanning and decoding accuracy on different barcode media such as paper, plastic card, and metal surface. It can be easily integrated into OEM equipments or systems (hand-held, portable, and mounted) to provide solutions for image capture, bar code reading, and barcode message processing.
Page 5
Quick Start How to read 1D/2D barcode with EM3000 Embedded Barcode Reading Engine When the trigger line (Pin 12 on the flexible cable) is pull low for 10ms, the engine starts a read. For the optimum reading stance, aiming pattern width should be 1mm or 2mm less than barcode width.
Page 6
Quick Start Supports & Service If you have a problem with your equipment, contact the Newland Support Center for your region. Before calling, have the model number, serial number, and several of your barcodes at hand. Call the support Center from a phone near the scanning equipment so that the service person can try to talk you through your problem.
Page 7
Quick Start Revisions Version Data Source Description Date Approved 20090826 V1.0 Page 6...