Check Digit - Newland EM1300 Integration Manual

Symbols
COOP25（Japanese Matrix 2 of 5）

Check Digit

COOP25 may include Check Digit (not compulsory) following its barcode
messages. If included, it may be the last digit. It verifies the barcode message.
"NO Check, Transmit All" means to read without check and transmit
»
all bytes including barcode message and Check Digit.
"Check, Do Not Transmit Check Digit" means to read and check. If
»
verification is successful, transmits barcode message; if not, engine sends an
error beep.
"Check, Transmit All" means to read and check. If verification is
»
successful, transmits all messages; if not, engine sends an error beep.
NO Check, Transmit All
【Pro CMD：99911703】
Check, Do Not Transmit Check Digit
【Pro CMD：99911705】
When "Check, Do Not Transmit Check Digit" is enabled and barcode message length
minus one is less than Min Message Length, it will lead to error beep.
E.g.：Reading a 4-byte (include Check Digit) COOP25 with the Min Message Length be-
ing 4 bytes and "Check, Do Not Transmit Check Digit" enabled leads to error beep.
nlscan.com
Code Programming ON
Code Programming OFF
Check, Transmit All
【Pro CMD：99911704】
Tools
Page 83