Check Digit - Newland EM1300 Integration Manual

Symbols
Code 11

Check Digit

Code 11 may include Check Digit (not compulsory) following its barcode
messages. If included, it may be the last one or two digits. It verifies the
barcode message.
"NO Check, Transmit All" means to read without check and trans-
»
mit all bytes including barcode message and Check Digit.
【Pro CMD：99912703】
Double Check Digits, MOD11/MOD11
【Pro CMD：99912705】
Single Check Digit MOD11（Len <= 10）
Double Check Digits MOD11/
MOD11 （Len > 10）
【Pro CMD：99912707】
Do not transmit Check Digit
【Pro CMD：99912711】
When "Check, Do Not Transmit Check Digit" is enabled and barcode message length
minus one is less than Min Message Length, it will lead to error beep.
E.g.：Reading a 4-byte (include Check Digit) Code 11 with the Min Message Length being
4 bytes and "Check, Do Not Transmit Check Digit" enabled leads to error beep.
nlscan.com
No Check
Single Check Digit，MOD11
【Pro CMD：99912704】
Double Check Digits, MOD11/MOD9
【Pro CMD：99912706】
Single Check Digit MOD11 （Len <= 10）
Double Check Digits MOD11/
MOD9 （Len > 10）
【Pro CMD：99912710】
Transmit Check Digit
【Pro CMD：99912712】
Tools
Code Programming ON
Code Programming OFF
Page 106