Annex I. Communication Objects - Zennio ALLinBOX 1612 v2 User Manual

ANNEX I. COMMUNICATION OBJECTS

"Functional range" shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any use or have a
particular meaning because of the specifications or restrictions from both the KNX standard or the application program itself.
ALLinBOX Hospitality: This device of the ALLinBOX family does not have the shutter channel nor standard thermostat functionalities, therefore it will not be
possible to have the objects associated with these functionalities. These objects are those whose name begin with "[Cx]" in the case of blinds and shutter
actuators and "[Tx]" for the standard thermostat.
Number
1
2
3
4
5, 16, 27, 38
6, 17, 28, 39
7, 18, 29, 40
8, 19, 30, 41
9, 20, 31, 42
10, 21, 32, 43
11, 22, 33, 44
12, 23, 34, 45
13, 24, 35, 46
14, 25, 36, 47
https://www.zennio.com
Size I/O Flags Data type (DPT)
1 Bit C - - T - DPT_Trigger
1 Bit C - - T - DPT_Trigger
1 Bit I C - W - - DPT_Enable
1 Bit I C - W - - DPT_Enable
1 Bit C - - T - DPT_Trigger
1 Byte I C - W - - DPT_SceneControl
1 Bit I C - W - - DPT_BinaryValue
1 Bit I C - W - - DPT_BinaryValue
1 Bit O C R - T - DPT_BinaryValue
1 Bit I C - W - - DPT_Enable
1 Bit I C - W - - DPT_Start
1 Bit I C - W - - DPT_Start
1 Bit I C - W - - DPT_Alarm
1 Bit I C - W - - DPT_Alarm
1 Bit I C - W - - DPT_Ack
1 Bit O C R - T - DPT_State
4 Bytes I/O C R W T - DPT_LongDeltaTimeSec
Functional Range Name
0/1 Reset 0
0/1 Reset 1
0/1 Lock Manual Control
0/1 Lock Manual Control
0/1 [Heartbeat] Object to Send '1'
0-63; 128-191 [Ox] Scenes
0/1 [Ox] On/Off
0/1 [Ox] On/Off
0/1 [Ox] On/Off (Status)
0/1 [Ox] Lock
0/1 [Ox] Timer
0/1 [Ox] Flashing
0/1 [Ox] Alarm
0/1 [Ox] Alarm
0/1 [Ox] Unfreeze Alarm
0/1 [Ox] Warning Time (Status)
-2147483648 -
[Ox] Operating Time (s)
2147483647
ALLinBOX 1612 v2 / 88 / 46 / Hospitality
Function
Voltage Recovery -> Sending of 0
Voltage Recovery -> Sending of 1
0 = Lock; 1 = Unlock
0 = Unlock; 1 = Lock
Sending of '1' Periodically
0 – 63 (Execute 1 – 64); 128 –
191 (Save 1 – 64)
N.O. (0=Open Relay; 1=Close
Relay)
N.C. (0=Close Relay; 1= Open
Relay)
0=Output Off; 1=Output On
0=Unlock; 1=Lock
0=Switch Off; 1=Switch On
0=Stop; 1=Start
0=Normal; 1=Alarm
0=Alarm; 1=Normal
Alarm=0 + Unfreeze=1 => End
Alarm
0=Normal; 1=Warning
Time in Seconds
Technical Support: https://support.zennio.com
36