Table of Contents
Advertisement
2.4 GENERAL
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering the
Parameters tab of the device.
ETS PARAMETERISATION
The "General" tab contains general settings. From this screen it is possible to
activate/deactivate all the required functionality.
Inputs [disabled/enabled]: enables or disables the "Inputs" tab on the left
menu. See section 2.5 for more details.
Outputs [disabled/enabled]: enables or disables the "Outputs" tab on the left
menu. See section 2.6 for more details.
Thermostats [disabled/enabled]: enables or disables the "Thermostats" tab on
the left menu. See section 2.7 for more details.
Master Light [disabled/enabled]: enables or disables the "Master Light" tab on
the left menu. See section 2.8 for more details.
https://www.zennio.com
Figure 8. General screen
Technical Support:
ALLinBOX 161
/ 88 / 46 / Hospitality
https://support.zennio.com
18
- Quick Links:
- Knx to Ip Interface
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ALLinBOX 1612 v2 and is the answer not in the manual?
Questions and answers