Screensaver showing the time and temperature measured by ZAS, with the suitable letter size for its reading from several meters away. The menu in the display offers several submenus: Climate control Scenes control Presence simulation Security General configuration ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 4
It includes two opto-coupled A/D inputs. The digital input operates as switch/sensor (detection of rising and falling edges) and the analog input allows the connection of one temperature probe. CE compliant. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
This device does not need any additional external power supply since it is powered through the KNX bus. For further information about the installation and technical characteristics, look up the ZAS Datasheet, available at www.zennio.com and in the packaging of the product. Elements Description Nº...
DISPLA AY MAN NAGEME ZAS counts on 12 tacti ile buttons for controll ing all its fu unctionalitie Figu ure 3 ZAS Front view The first row w of buttons consists of f the button n Menu that t allows the e direct acce ess to the m...
Page 7
The LED shows the status of the switch or light controls, in case it is enabled in ETS parameterization. Moreover the device will beep every time one button is pressed or the display is touched. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
ETS (thermostat). Button Switch off: it switches off the luminosity of the device. One press on the display or pressing a key of the remote control will activate the default luminosity of the device. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 9
ZAS will show the corresponding text message of that function. Once the message of the action has been shown, the display automatically returns to the submenu shown before pressing the button or the screensaver if it was active. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
1-bit objects. The F1 and F2 special funcions of the IR remote controller can be used for this aim, in case it is not blocked at the same time. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 11
(among the touch buttons) is pressed, during 10 seconds or until next press. Figure 5 Information Screen On the other hand, the Menu and the General Indicators of the device can be enabled for their configuration in additional section of menu: ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 12
Moreover, ZAS allows selecting one or two temperature sources as reference temperature. In case of using two temperature sources, the values provided by these sources will be mixed in a proportion configurable by parameter. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 13
After this period of time, the user will have to introduce the password again to activate the protected functions. Moreover, this menu allows introducing text messages for guiding the user in the process of password change, error messages, etc. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 14
“On”, “Off”, “Scene”, “Saved scene”, and the messages that will guide the calibration process. Note: The touch calibration is carried out pressing the buttons 1, 2, 7 y 8, in this order. The display will indicate the buttons to press, showing the corresponding instructions. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
ZAS has 8 tactile buttons for general use, two arrow-shaped buttons (temperature control and scrolling) and two buttons for accessing the Menu and validating the selected options (OK). The 8 buttons for general use, located in 4 rows, can be configured in the following way: ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 16
Note: A short key-press of the right button will increase 0.5ºC the temperature while la the long key-press will increase 1 ºC the temperature. In the same way, the left button will decrease the temperature. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
The following figure shows the appearance of the window General: Figure 6 Default General Configuration If the Inputs and Buttons are selected, it will be seen that ZAS has two inputs and 8 buttons, disabled by default. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 18
Figure 7 Default inputs configuration Figure 8 Default buttons configuration Next figure shows the available communication objects by default: Time and the communication objects for sending and receiving Scenes. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
The parameterization window General allows configuring the basic functionalities, menus and screens of the room controller ZAS. Figure 10 General configuration The basic functions that can be configured in the section General are the following: ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 20
(maximum luminosity). Enabling: using 1-bit communication object or scene. Value: luminosity value for the special level. This value can be “0” or “1”, in case of using 1-bit object or the number of the scene. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 21
Figure 11 Luminosity configuration Touch Blocking This function allows blocking and unblocking the buttons. Figure 12 Touch blocking configuration ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 22
Moreover, a window where configuring the buttons F1 and F2 of the remote control (which executes special functions) will be enabled. Special Function 1: configurable for sending value “1”, value ”0” or switching between these values. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 23
According to the type of indicator, the application program allows introducing a series of additional data, such as the indicator name (name that will be shown in the display for each indicator), a message or label for different status, units, etc. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Each option has an associated window for its configuration, accessible from the main menu, except for the password selection, which is in the Menu window. Main Menu Security can be also enabled in this section. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 25
Figure 15 Menu configuration Thermostat The thermostat can be configured with the following modes: Heating, Cooling and Heating and Cooling. Figure 16 Thermostat configuration ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 26
PI calculus. Additional Heating and additional heating band. Figure 17 Heating mode configuration Cooling It can be configured: Overheating Protection and the corresponding temperature. Control method for thermostat: 2-Point control or PI Control. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 27
In this window, it is also possible selecting the temperature value coming from Source 1 or Source 2 as reference temperature, or even using a proportional combination of the values provided by sources 1 and 2 (proportion 25-75%, 50- 50%, 75-25%) ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 28
The Presence Simulation has two windows associated: one for its configuration and the other for introducing the labels of the functionality. The presence simulation allows introducing the Starting time, Final time and the maximum and minimum ON and OFF times for the presence simulation. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 29
Configuration In the window Configuration the following controls and the desired names to be shown for these controls in the display can be enabled: Contrast Time Programming LED Touch Calibration Reset Figure 21 Configuration window ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Falling Edge allows selecting the sending value when this edge happens: No action, 1, 0 or switching 0/1. Moreover, it is possible to introduce delays for sending the values “0” and “1”, and defining a cyclical sending for these values: ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 31
Figure 23 Switching/Sensor Configuration Temperature probe When configuring an input as a temperature probe, the following options can be configured: Temperature sensor calibration: value between -50 and 50, in tenths of a degree. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
The window Buttons allows configuring the 8 direct access buttons for working in couple or individually: Buttons 1-2: Disabled, Individual or Couple. Buttons 3-4: Disabled, Individual or Couple. Buttons 5-6: Disabled, Individual or Couple. Buttons 7-8: Disabled, Individual or Couple. Arrow buttons. Yes or No. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 33
This parameter enables the Regular lighting, during some seconds when the button is pressed, or Status-dependent lighting, where the LED of the button will light while the object status is “1” and it will remain switched off when the object status is “0”. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 34
“1” through Light On/Off) while the long press increases the luminosity. This option allows introducing the name of the functionality of these buttons and selecting the dimming step % (100, 50, 25, 12.5, 6.25, 3.1 or 1.5). ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 35
When pressing the right and left button, the different labels will be shown in the display and their value sent to the bus. First press will show the current value of the control. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 36
0.5 ºC while the long press decreases the temperature value 1 by 1 ºC. Increment button: the short press increases the temperature 0.5 by 0.5ºC while the long press increases the temperature value 1 by 1 ºC. ZENNiO AVANCE Y TECNOLOGÍA www.zennio.com ...
Page 37
¡SIGN UP! http://zennioenglish.zendesk.com TECHNICAL SUPPORT ...