Zennio ALLinBOX 1612 v2 User Manual page 28

➢ Scaling [disabled/enabled]: if checked, object "[ML] General Switch-off:
Scaling" will be enabled, which will send a percentage value (configurable
in Value [0...100]) whenever the general switch-off takes off.
➢ Scene [disabled/enabled]: if checked, object "[ML] General Switch-off:
Scene" will be enabled, which will send a scene run / save order
(configurable in Action
the general switch-off takes off
➢ HVAC [disabled/enabled]: if checked, object "[ML] General Switch-off:
HVAC mode" will be enabled, which will send an HVAC thermostat mode
value (configurable in Value [Auto / Comfort / Standby /
Protection) whenever the general switch-off takes off
Note: the above options are not mutually exclusive; it is possible to send
values of different nature together.
Courtesy Switch-On:
The parameters available here are entirely analogous to those already
mentioned for General Switch-Off. However, in this case the names of the
objects start with "[ML] Courtesy Switch-On (...)". On the other hand, sending
scene save orders is not possible for the courtesy switch-on (only orders to
play scenes are allowed).
Note: object "[ML] Courtesy Switch-On: Binary Object" sends the value "1"
(when the courtesy switch-on takes place), in contrast to object "[ML] General
Switch-Off: Binary Object", which sends the value "0" (during the general
switch-off, as explained above).
https://www.zennio.com
[Run / Save] and Scene Number [1...64]) whenever
Technical Support:
ALLinBOX 161 / 88 / 46 / Hospitality
Economy
https://support.zennio.com
/ Building
28