Zennio ALLinBOX 1612 v2 User Manual page 20

Show Relay Switches Counter Objects [disabled/enabled]: enables two
communication objects to keep track of the number of switches performed by
each of the relays ("[Relay X] Number of Switches") and the maximum
number of switches carried out in a minute ("[Relay X] Maximum Switches
per Minute").
Synchronize Clock Master via NTP [disabled/enabled]: enables or disables
the "NTP" tab in the tree on the left. For more information, see section 2.11.
Note: This parameter must be enabled in the device that will be clock master
so that there is only one clock master in the installation.
DNS Servers Configuration: numeric text fields to enter the IP address of two
DNS servers:
➢ IP Address of DNS Server 1 and 2 [192.168.1.1, 192.168.1.2].
Note: The connection to the DNS server is necessary to ensure the correct
functioning of the NTP servers (see section 2.11). As long as there is no
connection to a DNS server, the date and time information will not be
synchronized.
https://www.zennio.com
ALLinBOX 161
Technical Support: https://support.zennio.com
/ 88 / 46 / Hospitality
20