Table of Contents
Advertisement
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (ON or OFF), then press the
(1)
[ENTER] key.
CONFIRMATION TIMER
1.ON
2.OFF
ON
Selected to print the alert report if the machine does not receive a MDN reply.
OFF
Selected not to print the alert report even if the machine does not receive a MDN reply.
(2)
After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
3.13Set Confirmation Time [MENU], [4], [6], [1], [3]
This sets the time interval to wait for the MDN reply before printing the alert report. This setting
is available when "Confirm. Timer" is set to ON.
Use the [ ↑ ] or [ ↓ ] keys to select the desired time interval, then press the [ENTER] key.
(1)
SET CONFIRM. TIME
1.15MINS
2.30MINS
3.1HR
15MINS - 24HRS
Select the interval time to wait for the MDN reply before printing an alert report.
(2)
After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
3.14MSG Size Limit
This sets the maximum size of the documents can be sent using the Internet Fax function. If
the size of documents exceeds the maximum size, the machine sends the documents sepa-
rately.
NOTE:
The document that contains only one page of an image cannot be separated even if the
document size exceeds the limit. In this case, the machine interrupts the job.
Internet Fax Kit - Function Settings
SET CONFIRM. TIME
3.1HR
4.4HRS
5.24HRS
[MENU], [4], [6], [1], [4]
3-20
May 2001 © TOSHIBA TEC
Advertisement
Table of Contents
