Table of Contents
Advertisement
Reception of documents
Set standby mode
Automatic reception
Manual reception
To set reception mode do the
following:
18
GB
Reception of documents
If your fax machine is connected to the PSTN,
there are two different ways of receiving
documents.
If the line is reserved exclusively for fax
operation.
If the line is used primarily for telephone traffic.
/ /
The fax machine switches over to recep-
tion as soon as the line rings. The number
of rings before the fax machine is
activated can be set (see below).
The fax machine is always
activated, even if the call is
initiated by a voice partner.
The call must be accepted manually; the
fax machine is not activated when the
line rings. The call must be accepted
manually; the fax machine is not
activated when the line rings. The call
must be accepted by an additional
telephone. If you wish to transmit a
document, you must press the START key
of the fax machine.
Ensure that any fax calls can be
accepted by means of the
external telephone. Pressing the
start key only has an effect if the handset
is off-hook.
Standby mode
Start the menu
The first 4 menu items are displayed.
Select a menu item
Make your selection
1. Automatic reception
2. Manual reception
Select a menu item
Example: Automatic reception
Make your selection
for the number of ringing signals before
the fax machine connects to the line.
01
Enter the required number
Confirm with START
Press STOP, return to standby
mode
TOSHIBA
TF 631
Advertisement
Table of Contents
