Toro Z MASTER 2000 Series Service Manual page 91

Parking Brake Assembly Removal (continued)
Parking Brake Assembly Installation
2000 Series Z MASTER®Service Manual
3460-328 Rev A
g421533
1. Lower the park brake shaft into position and slide it into the LH bushing.
2. Using a 1/2 inch socket, install the 2 (5/16 inch) nuts and carriage bolts to
secure the park brake shaft to the chassis.
g421532
3. Connect the extension spring to the chassis.
4. Install the wire harness to the parking brake safety switch.
Figure 95
Figure 96
Page 6–27 Chassis: Service and Repairs