Starter Solenoid Removal (continued)
Starter Solenoid Installation
2000 Series Z MASTER®Service Manual
3460-328 Rev A
g420413
1. Install the starter solenoid. Using a T30 torx driver, install the 2 (1/4 inch)
bolts to secure the starter solenoid to the chassis.
g420413
2. Using a 3/8 inch socket, install the 2 (#10) nuts to connect the 2 wire harness
connectors to the starter solenoid.
Figure 125
Figure 126
Page 8–7
Electrical: Service and Repairs