Toro Z MASTER 2000 Series Service Manual page 79

Seat Removal (continued)
2000 Series Z MASTER®Service Manual
3460-328 Rev A
g420411
4. Lift the seat forward and disconnect the seat pressure switch from the wire
harness. Tilt the seat back into position.
5. Using a 1/2 inch socket and wrench, remove the 2 (5/16 inch) nuts and
shoulder bolts securing the front of the seat to the chassis. Remove the
seat assembly.
g421557
6. Using a 1/2 inch socket, remove the 4 (5/16 inch) nuts securing the seat
assembly to the seat pan.
Figure 74
Figure 75
Page 6–15 Chassis: Service and Repairs