Toro Z MASTER 2000 Series Service Manual page 39

Engine Installation (continued)
2000 Series Z MASTER®Service Manual
3460-328 Rev A
2. Using a 9/16 inch socket, install the 4 (3/8 inch) bolts to secure the engine to
the chassis. Torque to 41 ± 4 N•m (30 ± 3 ft-lb).
g420390
For securing, refer to the torque sequence below.
g431179
3. Install the clutch. Refer to
4. Install the hydrostatic drive belt. Refer to
(page 7–11).
5. Install the deck belt. Refer to
6. Using a 1/2 inch socket, install the (5/16 inch) bolt securing the engine ground
to the engine crankcase. For Briggs engines, using a 7/16 inch socket,
install the 1/4 inch bolt securing the engine ground to the engine crankcase.
Figure 17
Figure 18
Clutch Installation (page
Hydrostatic Drive Belt Installation
Deck Belt Installation (page
Page 4–11
4–18).
5–9).
Engine: Service and Repairs