Toro Z MASTER 2000 Series Service Manual page 109

Hydrostatic Transaxle Assembly Removal (continued)
2000 Series Z MASTER®Service Manual
3460-328 Rev A
g422381
8. Release the parking brake. Remove the 2 pins securing the lower parking
brake linkages to the hydrostatic transaxle assembly. Remove the lower
parking brake linkages.
g422382
9. Remove the 2 cotter pins securing the bypass rods to the hydrostatic
transaxle assembly.
10. Using a 9/16 inch wrench, remove the 2 (3/8 inch) bolts securing the spacer
shaft to the hydrostatic transaxle assembly. Remove the spacer shaft.
Figure 114
Figure 115
Page 7–13 Drive: Service and Repairs