Toro Z MASTER 2000 Series Service Manual page 64

Spindle Installation (continued)
Deck: Service and Repairs
g422372
g429399
3. Install the blades. Using a 1-1/2 and 15/16 inch wrench, hold the spindle
shaft and install the (5/8 inch) bolt to secure the blade to the spindle shaft.
Torque to 142 ± 7 N•m (105 ± 5 ft-lb).
4. Install the deck belt. Refer to
5. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
Figure 56
Figure 57
Deck Belt Installation (page
Page 5–16
5–9).
2000 Series Z MASTER®Service Manual
3460-328 Rev A