Control Panel Removal (continued)
Control Panel Installation
Electrical: Service and Repairs
11. Remove the control panel.
g421536
1. Install the control panel.
2. Hook the throttle and choke cables to the carburetor linkage.
3. Using a 1/4 inch socket, install the 2 (#8) bolts to secure the throttle and
choke cables to the engine.
4. Connect the wire harness to the USB power port.
g421559
5. Connect the wire harness to the hourmeter.
Figure 135
Figure 136
Page 8–12
2000 Series Z MASTER®Service Manual
3460-328 Rev A