Toro Z MASTER 2000 Series Service Manual page 134

Parking Brake Switch Removal (continued)
Parking Brake Switch Installation
Electrical: Service and Repairs
g421531
1. Install the parking brake switch. Connect the wire harness to the parking
brake switch.
g421531
2. Connect the wire harness to the seat pressure switch and lower the seat
into place.
3. Using a 1/2 inch socket, install the 2 (5/16 inch) carriage bolts and nuts to
secure the rear of the seat to the chassis.
Figure 147
Figure 148
Page 8–22 2000 Series Z MASTER®Service Manual
3460-328 Rev A