Toro Z MASTER 2000 Series Service Manual page 85

Left Hand Pod Removal (continued)
Left Hand Pod Installation
2000 Series Z MASTER®Service Manual
3460-328 Rev A
g432460
9. Using a T40 torx driver, remove the 2 (5/16 inch) bolts securing the LH rear
guard to the chassis. Remove the LH rear guard.
g421544
10. Remove the LH pod.
1. Install the LH pod.
2. Install the LH rear guard. Using a T40 torx driver, install the 2 (5/16 inch)
bolts to secure the LH rear guard to the chassis.
Note: Lift the LH pod to allow the LH rear guard to seat into position.
Figure 84
Figure 85
Page 6–21 Chassis: Service and Repairs