Download Print this page

UNI-T UDP3000S Series Programming Manual page 47

Programming dc power supply

Advertisement

Programming Manual
Description:When use this command to set the network parameter, the setup parameter will not take effect
immediately and will not save to nonvolatile memory of the device. It must execute the
command":SYSTem:COMMunicate:LAN:APPLy"to make the parameter validly and save permanently. You
can execute multiple commands to modify multiple parameters and then execute a single
":SYSTem:COMMunicate:LAN:APPLy" command together.
For Example::SYSTem:COMMunicate:LAN:IPADdress "192.168.10.142" Set IP address to 192.168.10.142.
:SYSTem:COMMunicate:LAN:APPLy
set.
:SYSTem:COMMunicate:LAN:IPADdress?
Format::SYSTem:COMMunicate:LAN:IPADdress?
Function:Query IP address of the device.
Description:After the network parameter is set and before executing the
command":SYSTem:COMMunicate:LAN:APPLy", the result queried by this command is the temporary
parameter and it reflects the parameter data used when executing the command
":SYSTem:COMMunicate:LAN:APPLy". Otherwise, the result queried by this command is the currently
operating parameter of the device.
It returns:"192.168.10.142" .
For Example::SYSTem:COMMunicate:LAN:IPADdress?
Return:"192.168.10.142"
:SYSTem:COMMunicate:LAN:SMASK
Format::SYSTem:COMMunicate:LAN:SMASK "x.x.x.x"
Function:Set the network subnet mask of the device.
Description:When use this command to set the network parameter, the setup parameter will not take effect
immediately and will not save to nonvolatile memory of the device. It must execute the command
":SYSTem:COMMunicate:LAN:APPLy"to make the parameter validly and save permanently. You can
execute multiple commands to modify multiple parameters and then execute a single
":SYSTem:COMMunicate:LAN:APPLy" command together.
For Example::SYSTem:COMMunicate:LAN:SMASK "255.255.255.0" Set the subnet mask to 255.255.255.0.
:SYSTem:COMMunicate:LAN:APPLy
set.
:SYSTem:COMMunicate:LAN:SMASK?
Format::SYSTem:COMMunicate:LAN:SMASK?
Function:Query the network subnet mask of the device.
Description:After the network parameter is set and before executing the
command":SYSTem:COMMunicate:LAN:APPLy", the result queried by this command is the temporary
parameter and it reflects the parameter data used when executing the command
Instruments.uni-trend.com
Apply the network parameters that have been
Apply the network parameters that have been
UDP3000S Series
47 / 49

Advertisement

loading

This manual is also suitable for:

Udp3305s