UNI-T UDP3000S Series Programming Manual page 10

Programming Manual UDP3000S Series
SCPI Command Explanation
1. IEEE488 Common Command
*CLS
Format：*CLS
Function：Set the value of the enable register in standard event register.
*ESE
Format：*ESE <enable value>
Function：Set the value of the enable register in standard event register.
*ESE？
Format：*ESE?
Function：Query the value of the enable register in standard event register.
*ESR？
Format：*ESR?
Function：Query the value of the enable register in standard event register.
*IDN?
Format：*IDN?
Function：Query the basic information of the instrument, such as the manufacture's name, model, product serial
number and software version.
*OPC
Format：*OPC
Function："OPC"bit is set in standard event register after this command is executed.
*OPC?
Format：*OPC?
Function：Return"1"when all commands are executed.
*RST
Format：*RST
Function：Restore the instrument to the factory settings.
*SRE
Format：*SRE <enable value>
Function：Set the value of the enable register in status register.
Instruments.uni-trend.com 10 / 49