Advertisement
Programming Manual
Function：Query the output group number of delayer for the current channel.
Description：It returns"Grpn"，integer value.
For Example：:DELAY:GROUPs?
Return：100
:DELAY:CYCLEs
Format：:DELAY:CYCLEs <CycN>
Function：Query the cycle count of delayer for the current channel.
Description：It returns CycN: cycle count，integer value, range: 1-99999.
Notice：When the delayer is running, the parameter can not be set.
For Example：:DELAY:CYCLEs 1
:DELAY:CYCLEs?
Format：:DELAY:CYCLEs?
Function：Query the stop status of delayer for the current channel.
Description：It returns"CycN: cycle count，integer value.
For Example：:DELAY:CYCLEs?
Return：1
:DELAY:ENDState
Format：:DELAY:ENDState { ON|OFF|LAST}
Function：Set the stop status of delayer for the current channel.
Description：ON: When the delayer is stop, the output is enabled.
OFF：When the delayer is stop, the output is disabled.
LAST：When the delayer is stop, the last output status will be keeped.
Notice：When the delayer is running, the parameter can not be set.
For Example：:DELAY:ENDState OFF
:DELAY:ENDState?
Format：:DELAY:ENDState?
Function：Query the stop status of delayer for the current channel.
Description：It returns" { ON|OFF|LAST }".
ON: When the delayer is stop, the output is enabled.
OFF：When the delayer is stop, the output is disabled.
LAST：When the delayer is stop, the last output status will be keeped.
For Example：:DELAY:ENDState?
Return： OFF
:DELAY:STOP
Format：:DELAY:STOP {NONE|<V|>V|<C|>C|<P|>P} [,<value>]
Instruments.uni-trend.com
UDP3000S Series
27 / 49
Advertisement
