UNI-T UDP3000S Series Programming Manual page 35

Programming Manual
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
LOW：Low sensitivity；
MID： Middle sensitivity；
HIGH：High sensitivity；
For Example：:TRIGger:IN:SENSitivity D0, MID Set the input trigger signal sensitivity of IO1 to middle sensitivity.
:TRIGger:IN:SENSitivity?
Format：:TRIGger:IN:SENSitivity? {D0|D1|D2|D3}
Function：Query the sensitivity of trigger signal of the input mode trigger.
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
It returns"{LOW|MID|HIGH }".
LOW：Low sensitivity；
MID： Middle sensitivity；
HIGH：High sensitivity；
For Example：:TRIGger:IN:SENSitivity? D0 Query the input trigger signal sensitivity of IO1.
Return： MID
:TRIGger:IN:RESPonse
Format：:TRIGger:IN:RESPonse {D0|D1|D2|D3},{ON|OFF|ALTER}
Function：Set the trigger response for input mode trigger, when input trigger event is generated, the trigger will
execute the trigger response.
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
ON：When input trigger event is generated, the trigger will turn on the output of the controlled channel；
OFF：When input trigger event is generated, the trigger will turn off the output of the controlled channel；
ALTER：When input trigger event is generated, the trigger will invert the output of the controlled channel.
For Example：:TRIGger:IN:RESPonse D0, OFF
:TRIGger:IN:RESPonse?
Format：:TRIGger:IN:RESPonse? {D0|D1|D2|D3}
Function：Query the trigger response of input mode trigger.
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
It returns"{ON|OFF|ALTER }", it represents when input trigger event is generated, the trigger will execute
the trigger response.
ON：When input trigger event is generated, the trigger will turn on the output of the controlled channel；
OFF：When input trigger event is generated, the trigger will turn off the output of the controlled channel；
ALTER：When input trigger event is generated, the trigger will invert the output of the controlled channel；
For Example：:TRIGger:IN:RESPonse? D0 Query the input trigger response of IO1.
Return： OFF
turn off the output of the controlled channel.
Instruments.uni-trend.com
Return result：middle sensitivity
Set the input trigger response of IO1 to OFF.
Return result：When input trigger event is generated, the trigger will
UDP3000S Series
35 / 49