UNI-T UDP3000S Series Programming Manual page 38

Programming Manual
Function：Set the output signal polarity for output trigger.
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
POSItive：Output the positive signal
NEGAtive：Output the negative signal
For Example：:TRIGger:OUT:POLArity D0, POSItive Set the output signal of IO1 to positive.
:TRIGger:OUT:POLArity?
Format：:TRIGger:OUT:POLArity? {D0|D1|D2|D3}
Function：Query the output signal polarity of output trigger
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
Return："{POSITIVE|NEGATIVE}".
POSITIVE：Output the positive signal
NEGAtive：Output the negative signal
For Example：:TRIGger:OUT:POLArity? D0
Return：POSITIVE
11. PRESet
:PRESet#[:APPLy]
Format：:PRESet#[:APPLy]
Function：Apply the preset parameter of the specified group to the output setting parameter.
Description：The optional values for # are"1|2|3|4|5", cannot be omitted and the corresponding preset group.
For Example：:PRESet1:APPLy
:PRESet#:SET:VOLTage
Format：:PRESet#:SET:VOLTage {CH1|CH2|CH3|SER|PARA}, {<volt>|MINimum|MAXimum}
Function：Set the voltage value for the preset group.
Description：The optional values for # are"1|2|3|4|5", cannot be omitted and the corresponding preset group.
For Example：:PRESet1:SET:VOLTage CH1, 5.00
:PRESet#:SET:VOLTage?
Format：:PRESet#:SET:VOLTage? {CH1|CH2|CH3|SER|PARA}
Function：Query the voltage value of the preset group.
Description：The optional values for # are"1|2|3|4|5", cannot be omitted and the corresponding preset group. It
returns the real value of voltage.
For Example：:PRESet1:SET:VOLTage? CH1
Return：05.00
:PRESet#:SET:CURRent
Format：:PRESet#:SET:CURRent {CH1|CH2|CH3|SER|PARA}, {<curr>|MINimum|MAXimum}
Instruments.uni-trend.com
Query the output signal polarity of IO1.
Return result：The output signal polarity of IO1 is positive.
UDP3000S Series
38 / 49