Advertisement
Programming Manual
:TRIGger:OUT[:ENABle]
Format：:TRIGger:OUT[:ENABle] {D0|D1|D2|D3},{0|1|OFF|ON}
Function：Start or stop output mode trigger; If trigger is in input mode, the trigger will switch to output mode.
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
For Example：:TRIGger:OUT:ENABle D0, OFF Stop the trigger of IO1, IO1 to be output mode.
:TRIGger:OUT:ENABle D0, ON Start the trigger of IO1, IO1 to be output mode.
:TRIGger:OUT[:ENABle]?
Format：:TRIGger:OUT[:ENABle]? {D0|D1|D2|D3}
Function：Query the status of output mode trigger.
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
When IO is in input mode, it must return "OFF"；
When IO is in output mode, it will retrun"OFF"or"ON"by the status of trigger.
For Example：:TRIGger:OUT:ENABle? D0
Return：ON
:TRIGger:OUT:SOURce
Format：:TRIGger:OUT:SOURce {D0|D1|D2|D3},{CH1|CH2|CH3|SER|PARA}
Function：Set the controlled source for output mode trigger. IO will output the response signal by the setting
output signal when the cotrolled source is meet the trigger condition.
Description：D0|D1|D2|D3：Select output IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
Only one channel can select to be the controlled source.
CH1：Channel 1；CH2：Channel 2；CH3：Channel 3；SER：Serial channel；PARA：Parallel channel.
For Example：:TRIGger:OUT:SOURce D0, CH1
:TRIGger:OUT:SOURce？
Format：:TRIGger:OUT:SOURce？ {D0|D1|D2|D3},
Function：Query the controlled source of output mode trigger.
Description：D0|D1|D2|D3：Select output IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
Return：{CH1|CH2|CH3|SER|PARA}
CH1：Channel 1；CH2：Channel 2；CH3：Channel 3；SER：Serial channel；PARA：Parallel channel.
For Example：:TRIGger:OUT:SOURce? D0
Return：CH1
:TRIGger:OUT:CONDition
Format：:TRIGger:OUT:CONDition
Function ：Set the trigger condition of output mode trigger, when the controlled source is meet thr trigger
condition, IO will output the response signal by the setting output signal.
Description：D0|D1|D2|D3：Select output IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
Instruments.uni-trend.com
Set CH1 to the controlled channel for IO1.
Query the controlled source of IO1.
Return result：CH1 is the controlled source of IO1.
{D0|D1|D2|D3},{AUTO|OUTOFF|OUTON|>V|<V|=V|>C|<C|=C|>P|<P|=P}[,<value>]
UDP3000S Series
36 / 49
Advertisement
