Advertisement
Programming Manual
8. DELAY
:DELAY[:STATe]
Format：:DELAY[:STATe] {0|1|OFF|ON}
Function：Start or stop the delayer of the current channel.
Description：It can set and query the current channel by the command in"INSTrument"chapter.
For Example：:DELAY:STATe ON
:DELAY[:STATe]?
Format：:DELAY[:STATe]?
Function：Query the delayer status of the current channel.
Description：It returns"Running status(ON|OFF), remaining time, the current point, termination point, remaining
cycle count, stop status (OFF|LAST|ON)".
For Example：:DELAY[:STATe]?
Return：ON,1,12,2047,0,OFF
:DELAY:STARt
Format：:DELAY:STARt <StrN>
Function：Set the initial group number of delayer output for the current channel.
Description：StrN：output the initial group number，integer value，range: 0-2047，（initial group number +
output group number）cannot greater than 2048.
Notice：When the delayer is running, the parameter can not be set.
For Example：:DELAY:STARt 0
:DELAY:STARt?
Format：:DELAY:STARt?
Function：Query the initial group number of delayer output for the current channel.
Description：It returns"StrN"，integer value.
For Example：:DELAY:STARt?
Return：0
:DELAY:GROUPs
Format：:DELAY:GROUPs <Grpn>
Function：Set the output group number of delayer for the current channel.
Description：Grpn：output group number，integer value，range: 1-2048，（initial group number + output
group number）cannot greater than 2048.
Notice：When the delayer is running, the parameter can not be set.
For Example：:DELAY:GROUPs 100
:DELAY:GROUPs?
Format：:DELAY:GROUPs?
Instruments.uni-trend.com
UDP3000S Series
26 / 49
Advertisement
