Advertisement
Programming Manual
For Example：: :MONItor:STOPway OUTOFF, ON
:MONItor:STOPway MSG, OFF
condition is met.
:MONItor:STOPway BEEPER, ON
:MONItor:STOPway?
Format：:MONItor:STOPway?
Function：Query the stop way of the monitor for the current channel.
Description：It returns:"OutputOff:{ON|OFF}, Msg:{ON|OFF}, Beep:{ON|OFF}".
For Example：:MONItor:STOPway?
Return：OutputOff:ON,Msg:OFF,Beep:ON
10. TRIGger
:TRIGger:IN[:ENABle]
Format：:TRIGger:IN[:ENABle] {D0|D1|D2|D3},{0|1|OFF|ON}
Function：Start or stop the trigger of input mode; If the trigger is in output mode, the trigger will switch to input
mode.
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4。
For Example：:TRIGger:IN:ENABle D0, OFF Stop the trigger of IO1, IO1 will be the input mode.
:TRIGger:IN:ENABle D0, ON
:TRIGger:IN[:ENABle]?
Format：:TRIGger:IN[:ENABle]? {D0|D1|D2|D3}
Function：Query the trigger status of input mode.
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4。
When IO is in output mode, it must return "OFF"；
When IO is in input mode, it will retrun"OFF"or"ON"by the status of trigger.
For Example：:TRIGger:IN:ENABle? D0
Return：ON
:TRIGger:IN:SOURce
Format：:TRIGger:IN:SOURce
Function：Set the controlled source for input mode trigger. When input IO gernerated trigger signal, the controlled
source executes the action according to the setting response.
Description：D0|D1|D2|D3：Select trigger IO，D0-IO1，D1-IO2，D2-IO3，D3-IO4.
CH1：Channel 1；CH2：Channel 2；CH3：Channel 3；SER：Serial channel；PARA：Parallel channel.
In the last three parameter, CH1\CH2 cannot show up with SER\PARA at the same time，SER and PARA
cannot appears at the same time.
Instruments.uni-trend.com
Turn off output when the monitoring condition is met.
Hint message will not be pop-out when the monitoring
The beeper will sound when the monitoring condition is met.
Start the trigger of IO1, IO1 will be the input mode.
{D0|D1|D2|D3}, {CH1|CH2|CH3|SER|PARA}[, {CH1|CH2|CH3|SER|PARA}] [,{CH1|CH2|CH3|SER|PARA}]
UDP3000S Series
33 / 49
Advertisement
