Advertisement
Programming Manual
For Example：:OUTPut:OVP:STATe? CH1
Return：ON
:OUTPut:OCP:VALue
Format：:OUTPut:OCP:VALue [CH1|CH2|CH3|SER|PARA,] {<curr>|MINimum|MAXimum}
Function：Set the overcurrent value of a certain channel and set the channel as the current channel.
Description：If the channel parameter is ignored, then the current channel which is the channel need to be
controlled by default. "CH1, CH2"can only be selected in normal mode; "SER" can only be selected in serial
mode; "PARA"can only be selected in parallel mode.
For Example：:OUTPut:OCP:VALue CH1, 5.1
:OUTPut:OCP:VALue?
Format：:OUTPut:OCP:VALue? [CH1|CH2|CH3|SER|PARA]
Function：Query the overcurrent value of a certain channel.
Description：If the channel parameter is ignored, then the current channel which is the channel need to be
queried by default.
For Example：:OUTPut:OCP:VALue? CH1
Return：5.100
:OUTPut:OCP[:STATe]
Format：:OUTPut:OCP[:STATe] [CH1|CH2|CH3|SER|PARA,] {0|1|OFF|ON}
Function：Set the overcurrent protective switch of a certain channel and set the channel as the current channel.
Description：If the channel parameter is ignored, then the current channel which is the channel need to be
controlled by default. "CH1, CH2"can only be selected in normal mode; "SER" can only be selected in serial
mode; "PARA"can only be selected in parallel mode.
For Example：:OUTPut:OCP:STATe CH1, ON
:OUTPut:OCP[:STATe]?
Format：:OUTPut:OCP[:STATe]? [CH1|CH2|CH3|SER|PARA]
Function：Query the overcurrent protective switch of a certain channel.
Description：If the channel parameter is ignored, then the current channel which is the channel need to be
queried by default. It returns"ON | OFF".
For Example：:OUTPut:OCP:STATe? CH1
Return：ON
6. MEASure
:MEASure:ALL[:DC]?
Format：:MEASure:ALL[:DC]? [CH1|CH2|CH3|SER|PARA]
Instruments.uni-trend.com
UDP3000S Series
18 / 49
Advertisement
