UNI-T UDP3000S Series Programming Manual page 14

Programming Manual
Description：The optional value for # are"1|2|3|5|6". 1 is corresponding to CH1; 2 is corresponding to CH2; 3 is
corresponding to CH3; 5 is corresponding to SER; 6 is corresponding to PARA. If [:SOURce#] or # is
ignored, then the default is CH1. "1, 2"can only be selected in normal mode; "5" can only be selected in serial
mode; "6"can only be selected in parallel mode.
For Example：:SOURce1:VOLTage 25.00
[:SOURce#]:VOLTage[:LEVel][:IMMediate][:AMPLitude]?
Format：[:SOURce#]:VOLTage[:LEVel][:IMMediate][:AMPLitude]?
Function：Query the voltage value of a certain channel.
Description：The optional value for # are"1|2|3|5|6". 1 is corresponding to CH1; 2 is corresponding to CH2; 3 is
corresponding to CH3; 5 is corresponding to SER; 6 is corresponding to PARA. If [:SOURce#] or # is
ignored, then the default is CH1.
For Example：:SOURce1:VOLTage?
Return：25.00
[:SOURce#]:VOLTage:PROTection[:LEVel]
Format：[:SOURce#]:VOLTage:PROTection[:LEVel] {<vol>|MINimum|MAXimum}
Function：Set the overvoltage protective value of a certain channel and set the channel as the current channel.
Description：The optional value for # are"1|2|3|5|6". 1 is corresponding to CH1; 2 is corresponding to CH2; 3 is
corresponding to CH3; 5 is corresponding to SER; 6 is corresponding to PARA. If [:SOURce#] or # is
ignored, then the default is CH1. "1, 2"can only be selected in normal mode; "5" can only be selected in serial
mode; "6"can only be selected in parallel mode.
For Example：:SOURce1:VOLTage:PROTection 30.00
[:SOURce#]:VOLTage:PROTection[:LEVel]?
Format：[:SOURce#]:VOLTage:PROTection[:LEVel]?
Function：Query the overvoltage protective value of a certain channel.
Description：The optional value for # are"1|2|3|5|6". 1 is corresponding to CH1; 2 is corresponding to CH2; 3 is
corresponding to CH3; 5 is corresponding to SER; 6 is corresponding to PARA. If [:SOURce#] or # is
ignored, then the default is CH1.
For Example：:SOURce1:VOLTage:PROTection?
Return：30.00
[:SOURce#]:VOLTage:PROTection:STATe
Format：[:SOURce#]:VOLTage:PROTection:STATe {0|1|OFF|ON}
Function：Set the overvoltage protective switch of a certain channel and set the channel as the current channel.
Description：The optional value for # are"1|2|3|5|6". 1 is corresponding to CH1; 2 is corresponding to CH2; 3 is
corresponding to CH3; 5 is corresponding to SER; 6 is corresponding to PARA. If [:SOURce#] or # is
ignored, then the default is CH1. "1, 2"can only be selected in normal mode; "5" can only be selected in serial
mode; "6"can only be selected in parallel mode.
Instruments.uni-trend.com
UDP3000S Series
14 / 49