Advertisement
Programming Manual
mode.
Description：After the instrument receives the command, the group parameters of the delayer are automatically
generated according to single fall generation mode. The parameters of unspecified group are not
affected.
index：The group number of the first point, from which generation begins;
point：Point number need to be generated;
time_base：time base value；
time_step：step value；
Notice：When the delayer is running, the parameter can not be set.
For Example：:DELAY:GENerate:DEC 0, 10, 100, 1
:DELAY:GENerate?
Format：:DELAY:GENerate?
Function：Query the automatic generated parameter of delayer for the current channel.
Description：It returns： "STAT, <index>,<point> , {01P|10P}"or
"FIX,
"{INC|DEC}, <index>,<point> , <time_base>, <time_step>"
For Example：:DELAY:GENerate?
Return：DEC,0,10,100,1
9. MONItor
:MONItor[:STATe]
Format：:MONItor[:STATe] {0|1|OFF|ON}
Function：Start or stop the monitor of the current channel.
Description：It can set and query the current channel by the command in"INSTrument"chapter.
For Example：:MONItor:STATe ON
:MONItor[:STATe]?
Format：:MONItor[:STATe]?
Function：Query the monitor status of the current channel.
Description：It returns"{ON|OFF}".
For Example：:MONItor:STATe?
Return：ON
:MONItor:VOLTage
Format：:MONItor:VOLTage {<V|>V|NONE} [,<volt>|MINimum|MAXimum]
Function：Set the voltage condition in the monitor terms for the current channel.
Instruments.uni-trend.com
<index>,<point> , <time_on>, <time_off>"or
UDP3000S Series
30 / 49
Advertisement
