Preparing The Programs For The U-8 (Installing The Included Software) - Roland U-8ST Getting Started Manual

Getting Ready to Use the U-8
Preparing the Programs for the U-8 (Installing the
included software)
Follow the steps below to install U-8 Controller, U-8 Tuner, Cubasis VST U-
8, WaveLab Lite, and the online manuals on your computer.
1
Insert the included CD-ROM into your CD-ROM drive.
* Exit all other Windows applications before you install the software.
2
Click the Windows Start button, and then click Run.
The Run dialog will appear.
3
In the Open text box, input E:\Setup.exe and then click OK.
Alternatively, you can click Browse, then open the CD-ROM drive, select
the Setup.exe file, and click Open. Then click OK.
fig.05-07a.e.eps_50
4
The installer will start up. Click Next.
fig.05-08a.e.eps_35
28
In this explanation we are
assuming that your CD-
ROM drive is drive E:, but
the drive letter may differ
on your computer. If the
drive letter is different on
your computer, input the
appropriate letter. To check
the drive letter of your CD-
ROM drive, double-click
the My Computer icon.