Roland U-8ST Getting Started Manual page 32

Getting Ready to Use the U-8
Making the settings for Cubasis VST U-8
After installing Cubasis VST U-8, you need to make the following settings
to use the program. If you will be using Cubasis VST U-8 with VSC3.0, skip
ahead to p. 35.
Settings for the AUDIO device
1
From the Windows Start menu, select Programs - Steinberg Cubasis
VST - ASIO Multimedia setup to execute it.
2
If the following message appears, click No to close the dialog.
fig.0-1.eps_50
3
In the ASIO Multimedia Setup window, click the Advanced Options
button to open the ASIO Multimedia Setup - Advanced Options dialog.
4
In the Device Name for Output Ports, check 1:U-8 WAVE OUT 1
[MASTER] and 1:U-8 WAVE OUT 2 [EFFECTS]. Clear the check boxes for
all the other devices.
Confirm that Sync Reference for 1:U-8 WAVE OUT 1 [MASTER] is set to
Yes. If not, click 1:U-8 WAVE OUT 1 [MASTER], then press the Move up
button so that it appears at the top of the list.
5
In the Device Name for Input Ports, check 1:U-8 WAVE IN, then press the
Move up button so that it appears at the top of the list.
Clear the check boxes for the other devices if you do not need to use them.
fig.0-2.eps_40
32