Getting Ready To Use The U-8 With A Computer (Installing The U-8 Driver) - Roland U-8ST Getting Started Manual

Getting Ready to Use the U-8
Getting Ready to Use the U-8 with a Computer
(Installing the U-8 Driver)
1
After completing the connections between the U-8 and your computer and
peripheral devices (p. 15), turn on your computer and start up Windows,
and then turn on the U-8.
Windows will automatically search for unknown devices, and the following
dialog box will appear.
fig.05-01.e.eps_50
* If the display indicates Unknown Device instead of USB Composite Device,
the installation procedure cannot be continued, so click Cancel to terminate the
installation procedure.
Afterwards, while referring to "If Installation Doesn't Proceed As It
Should, Check the Following Points" (p. 24), proceed to check the status
of your computer.
2
Insert the included CD-ROM into your CD-ROM drive, and click Next.
3
Select Display a list of all the drivers in a specific location, so you can
select the driver you want, and click Next.
fig.05-02.e.eps_50
22
If the U-8 driver is already
installed in the computer
that you are using, delete
the previously installed U-8
driver before performing
the installation. For details
on deleting the U-8 driver,
refer to "The U-8 Driver"
(p. 67).