Roland U-8ST Getting Started Manual page 43

Starting up Cubasis VST U-8
1
Start Cubasis VST U-8.
2
The following dialog appears.
fig.1-18
Click Yes, then the Audio system test starts.
fig.1-19
If the test finished successfully, this completes the settings to play songs via
VSC 3.0.
If it does not finish successfully, exit Cubasis VST U-8, and restart the
program to test the system once again.
Raising the Buffer Size (Samples) for Roland VSC 3.0 in the ASIO
Multimedia Setup - Advanced Options dialog box (p. 41) may also solve
the problem.
Performance Settings for VSC 3.0
Depending on your computing environment,
there may be interruptions in the audio sound
or lower performance of the application.
In this case, lower the value for CPU Load Limit
in the VSC 3.0 Settings Window dialog shown
below. You can open this dialog by clicking the
VSC Helper Icon (
taskbar, and then Performance from VSC 3.0
Settings group in the list.
Getting Ready to Use the U-8
) on the Windows
Pressing the Detect Buffer
Size button will set a
suitable value for the buffer
size automatically.
43