Roland U-8ST Getting Started Manual page 61

5
Adjust each track's volume in the VST Mixer.
6
If you want to apply effects, put on the effect switch of the tracks.
fig.10-60de.eps_50
7
Use the Effect Send knob to adjust the send level to the effect.
The sounds of the track whose effect switch is on are mixed together into the
U-8 Mixer's WAVE 2 EFFECT track.
* If you want to adjust the send level for a monaural track, the sound will be sent from
the VST Mixer to the left side of the U-8 Wave2 Effect.
* If you want to adjust the send level for the stereo track separately, rotate the knob
using the mouse while holding the ALT key.
8
After settling the final mix level, select the record track and press the
Record Button to record the song.
A Note on Adjusting the System Effects
The send level to the effects from each input is adjusted with the SEND for
each input, while the outputs to which the effects output is mixed is
adjusted using the RETURN in EFFECTS.
fig.send.e, fig.return.e
Creating Songs with the U-8 and Cubasis VST
You can audition the effect-
applied sounds by pressing
the REC MONITOR button
on the U-8 Mixer, and can
adjust the final mix level
while listening the sounds.
If you change the
controllers of a stereo track
on the VST Mixer, the two
tracks move synchronized.
Use the mouse while
holding the ALT key to
separately control the
knobs, switches, and faders
for the stereo tracks.
61