Finishing Up The Song; Step 4: Press The Mix Down Button And Mix The Song While Adding System Effects - Roland U-8ST Getting Started Manual

4
To record the effect-applied sounds without using the EZ RECORDING
function, specify the Input source to MIC/A and put on the INSERT button
on the INPUT INST track. Press the INST button in the RECORD section,
then record the sounds.
Clicking ADVANCED in the effects edit screen opens the Advanced Edit
screen where you can make adjustments to all of the effect's parameters. If
there are more than four parameters, you can freely create the sounds from
within this window. For more information, refer to the "Advanced Edit
Screen" in "Effects Edit Screen" in the U-8 Controller Manual.

Finishing Up the Song

This outline explains how to get a final mixdown of the song, and then
record the song to an external tape recorder, MD, or other device.
Step 4: Press the MIX DOWN Button and Mix the Song
While Adding System Effects
When the U-8's MIX DOWN Button is pressed, a wizard guides you through
the preparations for mixdown.
The following preparations for mixdown are made when the U-8 Mixer is
used.
1
MIX
DOWN
Pressing the
RECORDING [Mixdown] Effect Setting dialog box.
2
At the EZ-RECORDING [Mixdown] Effect Setting dialog box, use the
CURSOR buttons to select whether to apply effects. After making the
selection, press the
fig.10-60a.e.eps_50
In this example, select Apply System Effect.
MIX DOWN button on the U-8 displays the EZ-
NEXT button or click Next.
Creating Songs with the U-8 and Cubasis VST
You can audition the effect-
applied sounds by pressing
the REC MONITOR button
on the U-8 Mixer, and can
adjust the final mix level
while listening the sounds.
59