Roland U-8ST Getting Started Manual page 39

11
You will be asked whether you restart your computer. To make the settings
effective, choose Yes, I want to restart my computer now in the dialog
box, then click OK. Windows will restart.
fig.1-9
This completes the installation of VSC 3.0.
Making the settings to use Cubasis VST U-8 with VSC 3.0
After installing VSC3.0, you need to make the following settings to use
Cubasis VST U-8 with VSC3.0.
Preparation to use VSC 3.0
1
Make sure that the power on the U-8 is turned on, then start up Cubasis VST U-8.
2
In Cubasis VST U-8, choose System from the Audio menu to open the
Audio System Setup dialog. If Roland U-8 ASIO device is specified for
ASIO Device, choose ASIO Multimedia Driver. Then, click OK.
3
If the following message appears, click Proceed, or click Save Song if you
need to save the song first.
fig.1-10
4
If the following message appear, click YES.
fig.1-11
5
Click OK to close the Audio System Setup dialog.
6
Then exit Cubasis VST U-8.
Getting Ready to Use the U-8
39