When Turning Off The Power; Preparing For Use Of The Included Programs; (Installing The Included Software); Installing U-8 Controller, U-8 Tuner, Cakewalk Home Studio U-8 - Roland U-8CW Getting Started Manual

Getting Ready to Use the U-8

When Turning Off the Power

Before turning off the U-8 unit, make sure that all the programs on the
computer that are using the U-8 and that are using audio or MIDI have
finished.

Preparing for Use of the Included Programs

(Installing the included software)

Installing U-8 Controller, U-8 Tuner, Cakewalk Home
Studio U-8
Follow the steps below to install U-8 Controller, U-8 Tuner, Cakewalk Home
Studio U-8, and the online manuals on your computer.
1
Insert the supplied CD-ROM into your CD-ROM drive.
* Exit all other Windows applications before you install the software.
2
The following dialog comes up automatically.
Click the U-8 CW button.
* If the MENU dialog does not come up automatically, you can also install the
programs by choosing Start - Run and running the application named Setup.exe
from the CD-ROM.
fig.05-07a.e.eps_35
3
Warning dialog will appear. Read it carefully, and click OK.
4
The installer will start up. Click Next.
20
Do NOT turn on the U-8
now. You can turn it on
when you install the U-8
driver.